Devices in the 2 buildings lost connection. Should check if it is a problem with any of the Ubiquiti antennas links.
The first thing to check is if from one of the network desktops you can see all the connected antennas. For this, you must install the “Ubiquiti Discovery” software. You can download the program from the following link for free.
Note: It is important that we install the Java version that comes with the “Ubiquiti Discovery tool” installer. If we already have a Java version on our desktop: please, uninstall it and install these version. to have an optimal operation of the tool.
If we run the software we can see that it only finds 2 connected Ubiquiti antennas
- In this step the technician must identify the antenna(s) that are faulty. For this, check which one has connection security cameras Miami problems.
- After identifying the fault, change the antenna and install and reconfigure it. Follow the steps below:
Reconfigure Ubitiqui antenna:
The operation of this antenna was normal, but it was verified that one of the antennas in “station mode”. That not linking them. This antenna needs a check and replace.
Configure the same address of damaged antenna:
Additionally, we must make the configurations at Ubiquiti networks Wireless level. this is neccesary to able to link this Station Antenna with the Repeater Antenna.
Note: In the Station Antennas it is important that in the Look to AP option we place the MAC address of the main antenna (Repeater Antenna) and they link it.
We must put the MAC address of the new antenna in the WDS Peers field. Additional the name of the wireless network in SSID.
Put the Mac address and Ubitiqui networks:
We must put the MAC address of the new antenna in the WDS Peers field. Additional the name of the wireless ubiquiti networks in SSID.
Finally, we must add the MAC addresses of the 2 Antenna Stations in the “Policy – ACL” option to allow the communication of these antennas with the main antenna or Repeater Antenna.
As we can see, there are 2 connections:
If we scan again with the “Ubiquiti device Discovery tool” application we can see that it already finds the new antenna we are adding and other existing antennas, your security cameras in Miami and other devices connections already online.