• H.265+, H.265, H.264+, H.264, MPEG4 Video Formats
• Up to 12 Megapixels Resolution Recording
• Synchronous 2-ch HDMI, 2-ch VGA and HDMI1 4 K (3840 x 2160) Resolution
• Connect Up to 32 IP Cameras with 320 Mbps Incoming Bandwidth
• Up to 16 SATA HDD and 1 eSATA Interface for Record and Backup
• Redundant Power Supply To Improve System Stability
• HDD Hot-Swap with Configurable RAID0, RAID1, RAID5, RAID6, RAID10
• VCA Detection Alarm and VCA Search
• RS-485 Control Hikvision-C and Pelco D/P Protocol
• Instant Camera Playback During Multi-Channel Live View
• 16-ch Synchronous Playback
• Reverse Playback for Multi-Channels
• Smart Search and Playback for Efficiency
• Customization of Tags, Searching, and Playing Back by Tags
• Alarm I/O, 16/8
• HDD Quota and Group Management
• HikConnect DDNS (Dynamic Domain Name System)
• Third-Party Network Cameras Supported
DS-9632NI-I16 Network Video Recorder
Warning for I-Series NVR users:
Before upgrading to v4.1.10 or v4.22.000 firmware. Be sure the NVR is on at least firmware 3.4.92 or 3.4.93. Failure to have the NVR on either of these firmware versions before upgrading to v4.1.10 or v4.22.000 could render the NVR in-operable.
| Max. Recording Resolution | 12 MP |
|---|---|
| Video Compression | H.265/H.265+/H.264/H.264+/MPEG4 |
| HDMI/VGA Output | 3840×2160/2560×1440 (HDMI1/VGA1 Synchronous), 1920×1080/1920×1080 (HDMI2/VGA2 Synchronous), HDMI1/HDMI2 Independent |
| IP Video Inputs | 32 |
| Alarm Input/Output | 16/8 |
| RAID Support | RAID 0, RAID 1, RAID 5, RAID 6, RAID 10 |
| Internal SATA | 16 SATA interfaces (up to 12 TB each) |
| Maximum Internal Storage | 192 TB |
| Max Incoming Bandwidth (Mbps) | 320 (200 with RAID) |
| Rack Units | 3 |
| Power Consumption | ≤45 W without HDD or DVD-R/W |
