Linear Access Base cardholder creation

Access Control Systems, Dicsan blog section, Uncategorized

How to create a new cardholder in Linear Access base?

1. To Create New linear access base Cardholder first you need to open the Cardholder set of your location (1).

Click on the Create New Cardholder icon (2). The name of the linear access cardholder set (e.g., “Staff”) will appear above the boxes where the name is entered

3. Fill in the cardholder’s First name (3), Last name (4), etc. in the cardholder data fields. Assign Expiration date and fill in account holder access controller panel fields if needed.

4. In the credentials area (6), you may assign credentials to the base access cardholder. Credentials can be transmitters, cards, entry codes, or telephone linear access control directory codes. You may assign more than one credential type and more than one of each credential to a access control Miami cardholder. For example, a cardholder could have two entry codes and three cards.

4.1 In case you need to add a base access transmitter first go to the transmitter section (7), then click on assign new individual transmitter (8), Then enter the data for the individual transmitter (9) and click ok to save it (10).

4.2 In case you need to add a linear access base card first go to the card section (7), then click on assign new individual card (8), Then enter the access control servers data for the individual card (9) and click ok to save it (10).

4.3 In case you need to add an entry linear access code first go to the entry codes section (7), then enter the data for the entry code (8) and finally click on assign (9).

5. Click APPLY to save the linear access control cardholder. Now you need to send the changes to the intercom, first, you need to connect to the network.

How to connect to network?

1. Click on the On/Off-line with installation button:

2. When connecting to access control Miami network A the Connecting to [A] (YOUR INSTALLATION NAME) dialog box will appear:

3. Once the linear access base is connected, the SD & RD lights will flash indicating that AccessBase 2000 is polling the network and that the network is responding. Click on the next button to have base access 2000 automatically disconnect from the network upon completion of programming duties:

4. Then click on this button to send the changes:

How to delete cardholder?

You may delete a linear access control cardholder by selecting the cardholder and clicking on:

https://linear-solutions.com/pc-based-access-control/

Millenium operator levels steps creation:

Access Control Systems, Business Security, Dicsan blog section, Uncategorized

Millennium operator levels steps installation:

Go to the Millenium operator system administration section, and then go to the operation level panel (2).

Click on new to add a new operator level (2):

The next step is to name it (3) and selects all the permissions that this level will contain. In this case, for the Millenium operator manager level in the Common windows.

You need to exclude the full access to Add the next points:

New Site (4), Database Restore (5), Operator Defined Fields (5), Operator Event Filter (5), Operator (5), and Operator Level:

Now in the DCD window of the Millennium access control, you only grant read access to Doors (7), Elevator Cards (7), and Floors (7):

Then in the Report window, you grant Millenium access controls to all the permissions (8, 9) and click on save (10) to finally add the Millenium operator level:

Once this step is done, you’ll need to create the following Millennium management data operator levels:

For the Frontdesk Millenium Operator Level:

The first step is to name it (1). Then, in the window you’ll need to grant full access only to Advanced Operator Commands (2), Operator Control (3):

Later in the DCD window, you only grant read Millennium access control to Doors (5), Elevator Cards (5), and Floors (5), finally, in the Report window, you will deny access to all reports as shown below (6, 7):

To work in the security operation level:

The first step is to name it (1). Then, in the Common window you’ll need to grant full access only to: Advanced Millenium Operator Commands (2), Operator Control (3), and Historical Log (3):

Millenium operator, Millennium security, full access, millennium management, millennium management data

Later in the DCD window, you only grant read Millenium access control to Doors (5), Elevator Cards (5), and Floors (5), Then in the Report window, you grant access to all the permissions (6, 7):

And the office data entry Millenium operator level:

The first step is to name it (1). Then, in the Common window you’ll need to grant full access only to:

Access Level, Advanced Operator Commands, Cardholder Batch Adding, Cardholder Custom Fields Setup, Cardholder, Cardholder Import, Cardholder Export, Cardholder Search, Historical Log, Holidays, Operator Control, and Time Periods of the Millenium access controls (2, 3, 4):

Later in the DCD window, you only grant read Millennium security access to Doors: (5), Elevator Cards (5), and Floors (5). Then, in the Report window, you grant access to all the permission (6, 7) .

https://www.glassdoor.com/Jobs/Millennium-Corporation-cyber-red-team-operator-Jobs-EI_IE366200.0,22_KO23,46.htm?filter.countryId=1

How to create a cardholders record

Access Control Systems, Business Security, Dicsan blog section, Uncategorized

How to create a millennium access Cardholder´s record?

We want to show you these steps to create a new Cardholders record in your millennium access control system. To do this, please, read below:

First step:

To create a new millenium access control Cardholder’s record, first, we need to access the Cardholder windows in the home menu as shown below (1,2):

Second step:

Once this step it’s done, you’ll see the following panel showing a list of all the existing cardholders in the millennium access control system. The only next step is going to the NEW option as shown below (3):

Thirt step:

The following step is going to the identification panel of the millenium access controls (4) and typing the data fields as it’s shown in the next step. First, we complete the First Name (5), middle name (optional), and Last Name (6), and we can change the employee ID also (7 optional).

Fourth step:

Following this, we go to the Cards tab in your millennium access control systems software (8) and enter the data in the fields shown below. First, we enter the encoded Card No. (9), and we mark in the active (10). The Facility code (FC-1-256 Encoded Card: 0-65535) (11), we select in card Format the one that says Wiegand 26 FC 1 (12), and finally, to assign the access Level, we double left click in the box marked under access control Level as shown in the figure (13).

Fifth step:

And this opens the following menu in your millennium access control systems. We click on the drop-down menu marked in the following figure and select among the available ones assigned to the user (14) and then click ok to save (15).

Sixth step:

Finally, we click save (16), and you will see the new cardholder added to the access control solution system.

https://mgiaccess.com/

ZKaccess access level and Personnel

Access Control Systems, Dicsan blog section, Uncategorized

zkteco access control level and access personnel steps creation:

We want to show you the steps to optimally configure these two sections in zkteco access control. Please follow these steps so, that you have optimal performance:

First step:

To create a zk access control level, all we must do later is go to the zkteco access control Level panel in the access control windows (1).

Second step:

Before, remember, the access level mentions what the users with verification can unlock at a specific time door or a certain number of entries. In this step, Click on the add option (2) in the zkteco access control software:

Thirth step:

after that, we enter the data in the fields, starting with zkaccess software Name (3). Following this, select a Time Zone from the Time Zones List (4) and all the doors that we’ll open with this zk access control level from the Door Combination list (5), and finally click ok to save (6).

Fourth step:

Then, to create personnel in the ZKAccess software, we must go to the Personnel panel in the Personnel windows (1).

Sixth step:

So, click on the Add option (2) in the zk access software; this will take you to the register of parameters that we will have to fill in yet:

Seventh step

Once we the following section in zkaccess software, we must complete the fields, Personnel Number (3 whatever you desired), First Name (4), Last Name (5), Card Number (6), select Department (7), and select the zk access control Level from the list (8), and finally click ok to save (9).

Eighth step:

At last, to see the events all we must do is go to the Real-Time Monitoring panel in the zk access control windows (1,2). So, lets try, and see the final result.

https://www.zktecousa.com/

How to install Millenium access level and time periods

Access Control Systems, Business Security, Dicsan blog section, Uncategorized

How to install Millenium ultra access level and time periods

To optimally configure the milennium ultra access level time periods and level accesses, we recommend that you follow these steps:

First Step:

To be able to configure the Time Periods, we move in the menu to the Millenium access controls Systems Administration option (1) and in this, we open the Time Periods panel (2) as shown below.

Second step:

Once in the panel of your Millenium ultra access control system, we touch the New option to add a new Time Periods.

Third step:

The first thing we do is name it (5), and then we click on the (+) option to add the days and times in which the Time Periods will work in the Millennium access control, as shown below.(6,7)

Fourth step:

And finally, we proceed to save the Millenium ultra access control configuration (8)

Fifth step:

In case we want to add the Holidays in the Time periods control system, we can do it as shown below (1), entering the name (2) and configuring it on an annual or relative basis. (3)

Sixth step

Once the Time Periods and Holidays have been configured in your, we can configure the Access Levels by going to the Millenium ultra access Level panel in the Millenium access control System Administration menu as shown below (1)

Seventh step

Once located in the Millenium ultra access level menu, the first thing we must do is click on the New option to proceed to add a new one (2)

Eight step

https://www.craftmasterhardware.com/parent-brand/millennium/

Now, as shown below, the first thing we do in the Millenium ultra access level is name it (3), followed by this in the Available objects column that is located on the left (4), we select the doors to which we want to grant access control with this access level, and in the column of the right Time Periods the frequency with which it will be repeated (5) and then we give it to add (6) and once this is done we can give it save to add the Millenium ultra acces Level (7)

zksoftware access control zkteco access control zk access control

How to configure time zones and holidays

Access Control Systems, Business Security, Dicsan blog section, Uncategorized

zk access control time zone and holidays configuration:

This blog will show you the essential steps to configure time zone and holidays in zk access control. For a correct installation, please follow these steps:

First step

Some functions of time zones can be beneficial for you. One is to specify when doors can usually open or give access control to some levels in a limited time. We can determine which entries can be accessed or not, only for specified users. So, to create a new Time Zone First go to the zk access control windows (1).

Second step

Note that by default, the system has an access control time zone named, which cannot be deleted but can be modified. The user can create more than one. After considering this, please go to the Time Zone panel (2) in your zk access controller:

Third step

Once this step it’s done, we click on the Add option in your zkaccess software system ,as shown below (3).

Fourth step

After completing the previous step in your zkteco access control, We enter the data in the fields below. First-time zone name (4), second establish the intervals (5), third copy to all days (6), or we can copy to specific days also, and finally click ok to save in your zkteco access control (7).

Fifth step

Remember, we have functions to add, modify and remove holiday access controls. To create holidays, we access to holidays panel in the zkteco access control windows, as shown below (1).

Sixth step

Click on the Add option (2) in zk access controller system:

Seventh step

Then we enter the data in the fields, starting with Name (3), Type (4), Start Date (5), End Date (6), Recurring (7), and finally, we click ok to save the information in the zk access software (8).

https://www.zktecousa.com/

What is Magnetic Lock?

Uncategorized

What is mafnetic door access control?

Hid magnetic door locks have been around for over 30 years and come in many different varieties. It is the most successful way to meet your expectations. There is also a wide variety of magnetic door strike access control systems. An integrator will help you determine the best method for you.

Magnetic Door Access Control

The magnetic door access control system must be as good as its installation. If done incorrectly, it can add frustration and risk by not performing the function correctly. It should be clarified that rates vary depending on the system you choose. Remember that with us, we give you a full support service with all our access control systems.

Hid magnetic door lock uses an electromagnet located at the top of the door frame to secure doors made up of an armature and a set of coils. The magnet is fixed to the door frame, and a metal plate must align the door. This system uses low voltage power to keep the entrance closed and is unlocked with a card, key fob, or access code. Can connect these types of locks to various access control systems. They can also be accessed via smartphone apps and often come with push bars.

As architectural and interior design trends continue, this type of hid magnetic door lock has become increasingly popular for sliding door preference. The diversity of magnetic door access control solutions is an excellent way to provide access control solutions for high and medium-level security, such as swimming pool gates and apartment complexes.

If you think of purchasing one of these magnetic door strike access control systems, consider the pros and cons.

What are the possible solutions for magnetic locking doors?

GLASS DOOR

FIRE DOOR

STAND-ALONE INDUVIDUAL DOOR

What to consider when buying a Magnetic door access control?

Advantages

Disadvantages

– These types of Hid magnetic door lock is extreme and durable. They are of such good quality that they last for long periods.

– This type of magnetic door access control can be adapted to almost any kind, even glass doors.

– Magnetic locks require less cutting into the door frame during installation.

– This type of lock eliminates the risk of lost keys or key fobs, minimizing the threat of insecurity.

– They are easy to install with no connecting parts.

– They are straightforward and quick to use after installation.

– It reduces costs by not having to cut new keys.

– This Hid magnetic door lock is frictionless and therefore do not wear out as a traditional deadbolt would.

– They have an innovative design.

– They have no moving parts, so they suffer minor damage in the event of a forced entry attempt.

– Firefighters do not see them as a good option because their functionality is entirely electronic. So, it is more difficult to exit the property in an emergency as power is required to unlock the door.

– Magnetic door access control can be more challenging to open if the magnetic lock is continuously locked.

– This system needs a constant power supply.

– cards or key fobs can be lost, allowing unauthorized persons access to the property.

– These locks can be expensive depending on the quality and strength of the safety.

How much does an Access Control System cost?

Liftmaster gate arm bracket replacement, how to replace share pin Liftmaster?

Uncategorized

Liftmaster gate arm bracket replacement

How to replace share pin Liftmaster?

The access control system of traffic arm gate has a original pin from the security arm gate, when we must change it, we should punch out so that the pin is gradually lowered. Because when the pin gets stuck in the barrier arm gate is difficult to get out of there. Therefore, we should do it very carefully and punch out the large pin. In this way, it weakens, and you can change the old bracket of the gate arm system.

When the old bracket of the arm gate is damaged, you must replace it with another entirely new one for the pines don’t continue to be broken; besides, the barrier arm gate doesn’t work correctly, and pines continue to break more often.

If you are going to replace it, you should punch out as much as possible to the pin that weakens and then remove it. You should consider that a hammer won’t work.

To insert this part in the engine, we must use a rubber hammer to avoid damaging the shaft of the arm gate. Already when the bar is mounted, we need to put the screws. Then we are going to regulate the barrier arm gate in the system.

It has already changed the piece with a new one; the access control system gate arm system works very well.

https://www.parkingzone.com/resources/choosing-the-right-replacement-barrier-gate-arm/

Security Camera System Installation: Video Storage

CCTV, Security Cameras, Uncategorized

Security cameras storage

How Much Storage Do You Need?

It is recommended that most businesses store footage from commercial security cameras for at least 30 days. For large operations, camera footage is often reserved for up to 90 days, requiring a more comprehensive storage solution with more capacity.

Storing more footage generally means using more physical space and hard drives, as well as more terabytes of space. The average 12-camera business surveillance system requires at least eight terabytes of room to store 1080p footage for 30 days, at industry-standard frames per second.

Limited Video Surveillance Storage

Professional security camera systems require storage that is secure and redundant. A commercial storage server for video surveillance system should not be an embedded operating system. It should have some kind of storage that is RAID-protected. There should be a solid-state drive on the operating system as well. Which can have a pre-and post-buffer to ensure nothing is missing—the entire context of the situation record. But most users follow the standard of keeping 30 days of recording based on motion activity.

Consumer security camera systems can store videos in the cloud. That is an excellent capability in theory, but the cost can ramp up depending on your set resolution. Yes, even if it’s an H.D. camera, that doesn’t mean you can store H.D. recordings in the cloud at an economical rate. Overall, the higher the resolution and the greater the number of cameras, the more your cloud storage costs. Furthermore, out-of-the-box features limit recordings to 10-second clips, which are not very useful by commercial standards. That is an area of focus in the professional surveillance camera industry. There is hope for commercial cloud video surveillance or “VSaaS” (Video Surveillance system as a Service). Between image quality limitations, intelligent video, and overall evidence management. There are too many limitations to recommend these platforms to our commercial clients who require mission-critical surveillance systems.

Another problem with these consumer systems masquerading as professional video surveillance kits is that they are often supplied at a low cost. Low-quality Linux system that doesn’t work reliably with hard drives made for video surveillance. Finally, the embedded DVR recorder systems typically have a set amount of storage. Suppose you add cameras in the future. These systems may not allow you to simply add another hard disk drive and instead require you to purchase an entirely new system.

The critical infrastructure and other applications with national security implications, even the professional security camera market, have had many issues in this area. The U.S. recently passed a law banning the use of equipment made by one of the world’s largest security camera in factors to secure government facilities. That not only means they can’t be used going forward, but it also means that these cameras and other equipment have to be obliterated from the operation.

Do You Need a Hard Drive For Security Cameras?

Recording security camera footage requires hard drives and cloud-based storage. If you have an analog security camera system, the DVR has a hard drive inside of it. For an IP security camera system installation, the NVR can use hard drives for onsite recording and cloud-based recording in a hard drive malfunction.

What About Cloud Storage?

Free cloud storage for security cameras could be easy, depending on the IP security cameras you’re using.

The IP camera cloud storage is available via either the camera manufacturer’s client or the third-party software. And the camera provider’s cloud storage for CCTV is the most reliable and convenient way to go. Most have FREE access to basic plans, NO subscriptions, and NO extra fees.

So getting an IP camera with cloud storage will be your best choice if you are keen on the cloud.

More modern CCTV camera systems allow users to store security footage in the cloud. They allow property owners and managers to access live and recorded footage from a mobile device or web browser. That is an excellent alternative to memory cards because it offers better storage of large video files, as well as more convenience in today’s internet-based world. The cloud allows users to get instant security alerts, making it easy to view and respond to security footage in real-time, even when they are offsite. Many cloud-based CCTV camera systems offer a limited amount of free cloud storage, as well as monthly, annual, or lifetime subscriptions.

IP camera cloud storage enables you to access your camera recordings anywhere, but it’s not the only option. If you want remote viewing and playback function, you don’t need to bind your IP camera to cloud storage. Any online IP camera can do that easily via the phone app, P.C., or web.

I.P. Camera Cloud Storage: How Does It Work

IP camera cloud storage uses the Internet to store your encrypted IP camera recordings in the offsite storage software, namely the cloud server. So that you can view, playback, delete and download the recordings from your cloud IP camera cloud as long as there is a network.

And the network plays a central role in the cloud storage for security cameras.

For example, the wireless security camera cloud storage uses a WiFi network to send video recordings and live feeds to the cloud server, convenient and straightforward. And the Argus 2 is a highly demanded model that works seamlessly with the Reolink Cloud.

No WiFi network? No worries.

You can still have the IP camera cloud storage with cellular cloud security cameras. Which use 3G/4G data to send streams over the net—offering full functions and benefits of CCTV camera cloud storage.

How to Access I.P. Camera Cloud Storage

It’s super easy! You don’t have to do anything other than sign into your account via the cloud security camera app or the cloud website after you bind cameras to the cloud. And then you can see everything on its cloud section, view and playback those cloud recordings wherever you are.

Remember that battery-powered cameras only record motion events from your IP camera to cloud storage to save battery life. You will not want large files on the cloud storage for CCTV system anyway.

I.P. Camera Cloud Storage Safety Issues

Privacy and safety issues of IP camera cloud storage are always a big concern. And the best solution to avoid these problems is to choose a reputable security camera brand with advanced encryption technology.

And the quality cloud IP cameras will enable Transport Layer Security (TLS). Store videos in Amazon S3 (the industry’s most-trusted service) and transmit videos through HTTPS (the protocol to ensure your data is encrypted and transferred over a secure connection).

And those trusted cloud storage camera manufacturers are more devoted to keeping the servers up to date with security patches and operating system updates. They will update the software regularly on their software pages so that the customers can always keep up-to-date.

So do remember to create a strong password to keep your cloud IP security cameras safe.

Best Cloud I.P. Cameras

A cloud storage camera with blurry images and false alarms will lose all its edges of free cloud storage.

Is there any reliable cloud IP security camera with free cloud-based storage?

Yes, of course. Here are the top two cloud IP cameras I’d recommend. (Bonus: They also have an S.D. card slot in the camera to enable local storage if you want.)

I.P. Camera Cloud Storage: Things to Consider

The chances are that your I.P. camera cloud storage is not enabled, but still, you want to save camera recordings to the cloud. In this case, you’ll need the help of either a 3rd party CCTV cloud storage software or an FTP server.

And here are two things you need to check before signing a contract with any 3rd party IP camera cloud storage platform:

Make sure your security camera system is supported by the 3rd party cloud I.P. camera software. Some cloud IP camera software only supports H.264 compression and RTSP protocol.
Check the resolution output of the cloud IP camera app and whether they will support both image and video recordings to make the best use of the CCTV cloud storage.

¿Cómo conectar cámaras IP a la nube y obtener almacenamiento en la nube?

Types of Security Cameras

Bullet Cameras
Dome Cameras
Turret Cameras

PTZ (Pan Tilt Zoom)
Cameras Fisheye
Cameras Multiple

Sensor Cameras
Doorbell Cameras
Wireless Security Cameras

No matter your surveillance system configuration, the type of security camera you choose will have a tremendous impact. And there are many types of commercial cameras and security camera installation service types out there. Each camera has its strengths and weaknesses, its benefits and downsides. So it would help if you made an informed choice to achieve the best security camera system for business safety. Remember, you’re encouraged to mix-and-match camera types when installing the security camera system that’s right for you.

Cellular Telephone Entry Systems

Access Control Systems, Uncategorized

Cellular Telephone Entry Systems

Cellular Telephone Entry Systems: Your Questions Answered

For decades, telephone entry systems were physical landline-based systems—a property or business owner who wished to install a telephone entry system outside another entry point. Help screen and grant visitors access would first have to have their telephone landline that the telephone entry system could connect to and call. From the 1980s to the 2000s, this type of landline connection was usually possible in most urban areas since the masses still used landline telephones. But purchasing such a system for use in a more rural area was still challenging because the cost to have telephone landlines laid was often cost-prohibitive.

Whether you manage a gated community or own an apartment building, the entry system you install affects how visitors, delivery carriers, and even residents access your property. Suppose you’re seeking a wireless access control system for your gate or door. In that case, you might be considering a cellular telephone entry system.

Although telephone entry systems have historically required landlines, some systems now operate over cellular connections. Read this post for a quick guide to cellular telephone entry systems. Find out if a cell phone entry system is the right solution to meet your property access control system needs.

As landline telephone installations became less frequently requested during that time, the older, existing landlines installed decades before were also starting to degrade and needed to be replaced. Unfortunately, the cost of replacing or installing a new landline had invariably gone up as well. That suddenly made it cost-prohibitive to install a landline telephone entry system in an urban area and helped pave the way for the development of newer, cellular-based telephone entry systems.

What is cellular telephone entry?

What is a cellular telephone entry system?

A cellular telephone entry system is a multi-tenant intercom that allows residents to use their cell phones to communicate with visitors and grant property an access control system to guests.

The cellular telephone entry system improves traditional telephone entry systems by using cellular networks instead of physical landlines. Many cellular telephone entry systems are modified landline entry systems.

Landline and cellular telephone entry systems function in the same way. They are both designed to enable a tenant to grant property access to their visitor at their core. The difference between the two systems is their connection: one is based on cellular signals, and the other occurs through a landline.

Let’s go over a bit of intercom terminology to help us fully understand the differences between cellular telephone entry systems and landline entry systems.