Akuvox R29C Manual: Configuration with Mobile License

The Akuvox R29C Manual is important for installing and configuring the device. In this blog, we will mention some of the most efficient options.

AKUVOX R29C CONFIGURATION WITH MOBILE LICENSE

To configure your Akuvox R29C door phone with a mobile license, follow these steps:

ACCESS THE DEVICE'S WEB INTERFACE

  • Ensure the connection between the device and your network.
  • Obtain the device’s IP address using the Akuvox IP scanner tool.
  • Enter the IP address into a web browser to access the login page.
  • Log in with the default credentials: username admin and password admin.

NAVIGATE TO THE LICENSE CONFIGURATION SECTION

  • Once logged in, go to the “Upgrade” section in the menu.
  • Select the “License” tab to view license-related settings.
  •  

ENTER THE MOBILE LICENSE KEY

  • In the “License” tab, locate the “License Key” field or similar.
  • Enter your mobile license key into this field.
  • Click the “Submit” or “Activate” button to apply for the license.
  •  

VERIFY LICENSE ACTIVATION

  • After submission, the system should display a confirmation message indicating successful activation.
  • You can also check the status in the “License Information” section to ensure the mobile license is active.

CONFIGURE MOBILE ACCES FEATURES

  • With the mobile license active, additional settings for mobile integration may become available.
  • Navigate to the relevant sections (e.g., “Intercom” > “Mobile Access”) to configure features such as mobile app integration, push notifications, or remote access.

SAVE AND REBOOT

  • After configuring the necessary settings, ensure you save all changes.
  • Navigate to the “Upgrade” > “Basic” section and click the “Reboot” button to restart the device, applying all new configurations.
  •  

AKUVOX R29C MANUAL INSTALLATION STEP BY STEP

Akuvox R29C Manual

PREPARATION

  • Power Supply: Ensure you have a 12V/1A DC power adapter or a PoE (Power over Ethernet) switch to power the device.
  • Network Connection: Prepare a CAT5e/6 Ethernet cable for network connectivity.
  • Mounting Accessories: Gather the necessary mounting brackets and tools, depending on your installation type (wall or flush mounting).
  •  

MOUNTING THE DEVICE

WALL MOUNTING

  • Power Supply: Ensure you have a 12V/1A DC power adapter or a PoE (Power over Ethernet) switch to power the device.
  • Network Connection: Prepare a CAT5e/6 Ethernet cable for network connectivity.
  • Mounting Accessories: Gather the necessary mounting brackets and tools, depending on your installation type (wall or flush mounting).

FLUSH MOUNTING

  • Cut an opening in the wall that matches the dimensions of the flush mounting box.
  • Insert the flush mounting box into the opening and secure it.
  • Place the R29C device into the box and fix it with screws.
  •  
Akuvox R29C Manual

CONNECTING CABLES

  • Ethernet Connection: Connect the Ethernet cable to the LAN port of the R29C.
  • Power Connection:
    • If using PoE, ensure the Ethernet’s cable connection to a PoE-enabled switch.
    • If using a DC adapter, connect it to the R29C’s power input and plug it into a UPS-backed power outlet.
  • Door Strike Connection: Connect the door strike wires to the relay terminals on the R29C as per your access control requirements.

DEVICE INITIALIZATION

  • Once powered, the R29C will boot up.
  • Use the Akuvox IP scanner tool to identify the device’s IP address on your network.
  • Access the device’s web interface by entering the IP address into a web browser.
  • Log in with the default credentials (username: admin, password: admin).

CONFIGURATION

  • Network Settings: Configure the network settings to match your local network requirements (e.g., static IP, subnet mask, gateway).
  • SIP Account: Set up the SIP account details to enable VoIP calling features.
  • Access systems: Configure the relay settings and user access methods (e.g., RFID cards and PIN codes).
  • Firmware Update: Check for updates to ensure the device runs the latest software version.
Akuvox R29C Manual

TESTING

  • Test the call functionality by calling a connected indoor monitor or phone.
  • Verify the door release mechanism operates correctly when access is granted.
  • Ensure video and audio quality meet your expectations.

HOW TO SET UP AKUVOX R29C MANUAL?

POWER THE DEVICE

Option 1: Power over Ethernet (PoE)

Connect the device to a PoE-enabled switch using an Ethernet cable. This will provide both power and network connectivity.

Option 2: DC Adapter

Connect a 12V/1A DC adapter to the device’s power input and plug it into a power outlet.

ACCESS THE DEVICE

Find the Device's IP Address

Use the Akuvox IP scanner tool to detect the device on your network. The tool will display the device’s IP address.

Access Web Interface

Open a web browser and enter the IP address of the device.

Default username: admin
Default password: admin

CONFIGURE NETWORK SETTINGS

  • Navigate to the “Network” section.
  • Configure as per your network requirements:
    • Set a static IP address or leave it as DHCP (default).
    • Configure the subnet mask and gateway if needed.

SET UP SIP ACCOUNT

  • Navigate to the “Account” or “SIP” section.
  • Input your SIP server details:
    • SIP Server Address
    • Username
    • Password
    • Port number
  • Save and apply the settings.

CONFIGURE ACCESS SYSTEMS

Relay Settings

  • Go to the “Intercom”> “Relay” section.
  • Configure the relay to control the connected door strike or gate.

User Access Methods

  • Navigate to “Access Control.”
  • Set up authentication methods like RFID cards, PIN codes, or mobile credentials.
  •  

ENABLE MOBILE ACCESS

  • If you have a mobile license, enter the license key in the “License” section under “Upgrade.”
  • Set up push notifications and remote control features for the Akuvox app.

TEST THE DEVICE

  • Initiate a call to the configured SIP phone or indoor monitor.
  • Verify audio and video quality.
  • Test door release functionality.

UPDATE FIRMWARE

  • Navigate to the “Upgrade” section in the web interface.
  • Check for updates and upload the latest firmware if available.

SAVE AND REBOOT

Save all changes and reboot the device to apply the configurations.

DOWNLOAD FOR MORE INFORMATION

Share:

Facebook
Twitter
Pinterest
LinkedIn
On Key

Related Posts